| |
Our Series 7500/7600 Multifunction Meter combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tach. A popular option is to replace the existing tach(s) with this system thus eliminating the need to cut new holes in the panel.
Diesel Model Features
- Fits most diesel engines rated from 25 hp to 6000 hp. Twin diesels require two separate FloScan systems.
- Microprocessor based electronics with 2-stage adjustable calibration of GPH & gallons used for superior accuracy.
- Simultaneous independent display of Engine Hour Time, RPM, GPH, and gallons consumed.
- RPM readout accurate to 1 RPM. Easily connects to existing magnetic, a/c signal generator, or engine alternator RPM pick-ups.
- GPH and Totalizer readings displayed in tenths of a gallon. Totalizer capacity up to 99,999 gallons.
- Dual color (amber/green) backlighting of LCD provides for easy night viewing.
- Requires 1 Momentary ON / Constant OFF toggle button switch for resetting fuel totalizer reading. See Accessories page for recommended toggle switch (4001-433-00) for this feature.
- Meter fits 3-3/8" panel opening (standard tach size). Can replace existing tachs in panel.
- Models available in black or white (bezel/dial face).
- Uses Model 201/231 Series K Diesel Standard Flow Sensors which are designed for feed and return flows in the range of 0.3 - 48 GPH. Standard Flow Sensors incorporate 1/4" NPT female inlet and outlet ports with 1 PSI or less pressure drop at rated flows.
- Uses Model 233/236 Series K Diesel High Flow Sensors which are designed for feed and return flows in the range of 30 - 400 GPH. High Flow Sensors incorporate 1" NPT female inlet and outlet ports with 1 PSI or less pressure drop at rated flows.
|
Click ( HERE ) to go directly to our Model Selection Guide. If your engine is not listed in our Model Selection Guide, please e-mail sales@floscan.com or fax (206) 523-4961. Tel: (206) 524-6625.
|
