HOME PAGE   ABOUT US   SUPPORT   CONTACT US   CASE STUDIES   SEARCH  
 
AVIATION RECREATIONAL MARINE COMMERCIAL MARINE NMEA 2000 GENERATORS ORDER PARTS ONLINE
 


A Series 85000/86000 Fuel Flow Interface System combines a digital LCD Engine Hour Meter, Tachometer, Fuel Flowmeter, and Fuel Totalizer in a single 3-3/8" diameter instrument which fits the panel space of a standard tachometer.  This meter also provides a fuel flow rate output signal for GPS systems, data acquisition systems, and for FloScan Series 97000/98000 GPS Interface systems in twin diesel engine boats.


Diesel Model Features

• Fits most diesel engines rated from 25 hp to 4000 hp.  Twin diesels require two separate FloScan systems.


• Microprocessor based electronics with 2-stage adjustable calibration of LPH & liters used for superior accuracy.


• Simultaneous independent display of engine hour time, RPM, LPH, and liters consumed.


• RPM readout accurate to 1 RPM.  Easily connects to existing magnetic, a/c signal generator, or engine alternator RPM pick-ups.
 
• LPH and totalizer readings displayed in whole liter increments.  Totalizer capacity up to 99,999 liters.


• Dual color (amber/green) backlighting of LCD provides for easy night viewing.


• Requires 1 Momentary ON / Constant OFF toggle button switch for resetting fuel totalizer reading. See Accessories page for recommended toggle switch (4001-433-00) for this feature.


• Meter fits 86mm panel opening (standard tach size).  Can replace existing tachs in panel.


• Models available in black or white (bezel/dial face)


• Uses Model 201/231 Series K Diesel Standard Flow Sensors which are designed for feed and return flows in the range of 1 - 180 LPH.  Standard Flow Sensors incorporate 1/4" NPT female inlet and outlet ports with 1 PSI or less pressure drop at rated flows.


•Uses Model 233/236 Series K Diesel High Flow Sensors which are designed for feed and return flows in the range of 110 - 1550 LPH.  High Flow Sensors incorporate 1" NPT female inlet and outlet ports with 1 PSI or less pressure drop at rated flows.

 

Pulse Output Features

The standard fuel flow output signal is an open collector transistor (square wave) type where 1000 pulses equal 1 liter consumed.  A frequency counter is required for interfacing to a data acquisition system or vessel monitoring software program.  The pulse output instrument produces a square wave DC signal with an approximate 50/50 duty cycle. 

0-5 volt analog output models are available on a special order basis.  Customer can specify the fuel flow value (GPH) that equals 5 volts.

Requires 1 SPST push button panel switch for resetting fuel totalizer reading.  See Accessories page for recommended toggle switch (4001-433-00) for this feature.

Click ( HERE ) to go directly to our Model Selection Guide.  If your engine is not listed in our Model Selection Guide, please e-mail sales@floscan.com or fax (206) 523-4961.   Tel: (206) 524-6625.


LATEST NEWS
R/V Point Sur Case Study
FloScan Reduces Fuel Consumption and Lessens Environmental Impact.

Fuel costs are the single largest recurring expense involved in operating a commercial vessel and FloScan is dedicated to providing advanced Fuel Flow Computers that maximize vessel fuel efficiency.
 
.

FEEDBACK | US OUTLETS | WORLDWIDE DISTRIBUTORS | DEALER INSTALLERS | ORDER CATALOG | MOST IMPORTANT | TECHNOLOGY | BENEFITS | APPLICATIONS UNLIMITTED